DX1 Series Exit Devices are designed and manufactured for simplicity, strength, durability, aesthetics and installer-friendly innovations.

• Devices and trims are designed for new or retrofit installation into other manufacturers’ exit devices and trims.
• Made to comply with the highest safety and security standards in the industry.
• cULus listed for Panic Exit Hardware or 3-hour Fire Rated Exit Hardware.
• Certified ANSI/BHMA A156.3-2014 Grade 1.

A – Standard flat/hex key dogging or optional cylinder dogging available for non-fire rated exit devices.

B – Special plastic inserts and rubber bumpers reduce noise.

C – Detachable center case allows switching between mechanical and electrical options which replaces the need of buying two complete sets.

D – Replaceable cam breaks at a predetermined load to prevent further damage of the trim mechanism. Handing change is simple and easy.

E – Stainless steel latch and security deadlatch.

F – Center case with maximum versatility, surface and concealed vertical rods can be adjusted inside the center case with an ingenious rod holder design.

G – Double cylinder with indicator devices are used as classroom intruder locks, enabling the locking of the outside trim without opening the door.

H – Push bar with integrated end caps and pivot add stability and make the bar move smoothly regardless of where the pressure is applied on push bar. 
Accessible version is also available to meet the 2010 ADA Standards and Accessible Design to operate the device with 5 lbs of force.

I – Flush end cap design.

Please contact your local representative for more information.